All Change.

Hi Folk's

Sorry I haven't posted for a long long time mainly because I haven't done anything to the boat. My new Job has been very busy and we have also bought a house and moved in the last month. This has basically taken up all my free time recently. There is a good out come thought my new place a a large garage and workshop which will mean the boat will be at the bottom of the garden not seven miles away. Much easier to nip down and do some work when I have to odd spare hour here and there. Hopely I'll have some photo's soon.

Still Not Getting Much Done.

Hi Guy's

Apologies for not posting in a while but not much to write, the new job is pretty full on with lots of time away. I have started to make templates to make a support cradle to sit the boat in while I fit out the inside. Money has been tight as both my cars failed their MOTs and cost a bundle to fix I did all the work myself as I am to tight to pay somebody else to do work I can do myself.

Also I am in the process of buying a house not a cheap undertaking when you live in Cornwall but the place has a large garage/workshop which may possibly be larger than the house. This is good as I will probable spend most of my time in there.

Anyway I should be able to make some progress with the boat being at the bottom of the garden instead of ten miles away even if I do have a morgage the size of the debt of a small 3rd world country.

Well thats all folks.

Not getting much done.

Hi Folk's

not really getting much done this month. I have just started a new job not not working shifts anymore so have less spare time now. I managed to get a sheet of 8' by 4' by 3/4'' ply to use as one part of a cradle. I will probably need two more sheets.

Just been giving some thought as to how I can make a template to get the hull profile so I can lay it off on the cradle.

Anyway my car needs a fair bit of work for the MOT so my cash is going in that direction at the moment so I probably won't make too much progess this month.

Christmass.

Hi Folks

sorry no photo's to day I haven't been on for a while mainly because I'm not getting much done this month with the run up to Christmass. I mixed up some filler to give the hull a quick skim to fill some areas of coarse grain but with the cold weather the resin isn't curing fully and my sand paper is just clogging up when I try to knock it back so Ive called it a day until the new year.

I will have to find a new workshop I can't stay in this one past February but at least I can move the hull now.

Job for the new year mot the car and build a cradle to support the boat so I can fit out the inside.

Well that's about it really
Have a good Christmass

Steve.

Gunnels.

Hi Guy's

sorry I've not posted in a while been a bit busy cracking on with the gunnel's. I bought the timber rough sawn so had to plane it up true before I could mark out the gunnel profile from the plans.

That's done now I tried clamping them to the mold but they were too thick they wouldn't bend round. So I have planed them down to 3/4" thick they bend round nicely now although I'm worried how the glue will hold when the clamps come off.

I have the first gunnel clamped on and the glue areas marked out, I'm going to leave it on a couple of days to allow the timber to take up the curve before I glue it.

Stem Cap Complete.

Hi Folks,

well the stem cap is finished well apart from a bit of sanding. It looks quite good seeing as most of it has been done by eye. Its a bit different from the one I saw on the jollyboat in the museum on the Isle of White but its profile is the same as that shown on the plans.

It was slightly asymmetrical so in the end I planed each side flush to the surrounding veneers using a straight edge as a guide, then I carefully planed a 3/8" flat for the keel band to screw to. Finally I used a piece of veneer bent to a nice curve to mark the stem and then block planed the curve to give a smooth transition from keel to stem.

I now have a sound hull skin that can be moved it necessary. Next job is to plane down the stock I bought for the gunnel's, I have already done one three to go.

Stem Cap Fitted.

Hi Guy's

I've glued the stem cap in place and rough faired it. I could only clamp it at the bottom I couldn't clamp it at the top so I wedged it down with a plank against the workshop wall. Best I could do but it worked quite well. I rough faired it with a block plane and a spoke shave it just needs fairing up with a sanding block.