The work you see here was done between July and September 2007 last year. In the first photo you can see the first three veneers on the Starboard side two have been joined with scarf joints to cut down on wast by using off cuts. Not much else to say It's the same process as for the first layer of veneer but with the veneers at approximately 90 degrees to the first layer, bit like curved plywood really. Oh and yes it will go out the door the max depth of the hull from mast latch to keel is 29" the door is 34" so it should go throught and anyway I can allways knock the wall down nobody will notice.
No comments:
Post a Comment